Atari Punk Console with LFO ()
[hardware]
- Project stage: Beta Edition
- Tools: KiCad
- Vimeo: Vimeo
- Photos by: Iza RzechuĊa
- Links:
This project is based on Atari Punk Console (Stepped Tone Generator), which was originally created by Forrest Mims.
Schematic
Photos
BoM
| # | Reference | Qty | Value | Footprint |
|---|---|---|---|---|
| 1 | C1 | 1 | 100u | CP_Radial_D6.3mm_P2.50mm |
| 2 | C2, C4, C6 | 3 | 10n | C_Disc_D3.4mm_W2.1mm_P2.50mm |
| 3 | C3 | 1 | 100n | C_Disc_D3.4mm_W2.1mm_P2.50mm |
| 4 | C5, C7 | 2 | 2.2uF | CP_Radial_D6.3mm_P2.50mm |
| 5 | C8 | 1 | 10u | CP_Radial_D5.0mm_P2.50mm |
| 6 | D1 | 1 | 1N4007 | D_A-405_P10.16mm |
| 7 | D2 | 1 | LED | LED_D3.0mm |
| 8 | J1 | 1 | Barrel_Jack_Switch | BarrelJack_54-00166 |
| 9 | J2 | 1 | AudioJack2_Ground_Switch | AudioJack_3.5 |
| 10 | J3 | 1 | Conn_01x08_Male | PinHeader_2x05_P2.54mm |
| 11 | R1, R2, R3, R4 | 4 | 1K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm |
| 12 | R5 | 1 | 10K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm |
| 13 | R6 | 1 | 4K7 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm |
| 14 | RV1, RV2, RV3, RV4 | 4 | 500K | Potentiometer_R9011 |
| 15 | RV5 | 1 | 100K | Potentiometer_R9011 |
| 16 | SW1 | 1 | SW_DIP_x04 | SW_DIP_SPSTx04_Slide_9.78x12.34mm_W7.62mm_P2.54mm |
| 17 | SW2 | 1 | SW_Push_Dual | SW_PUSH_6mm_H4.3mm |
| 18 | U1, U2 | 2 | NE556 | DIP-14_W7.62mm |